Central
RANGE OF PERFORMANCE Flow rate up to 220 l/min (13.2 m3/h) Head up to 9 m LIMITS OF USE Depth up to 3 m Liquid temperature up to +40°C (+90° C for a maximum period of 3 minutes) Passage of solid bodies up to Ø 5 mm Drainage level 2 mm from the bottom
particularly resistant to impact and corrosion, with threaded port ISO 228/1. • SUCTION GRID: technopolymer. • IMPELLER: open type in technopolymer. • MOTOR SUPPORT: stainless steel AISI 304.• MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104. • DOUBLE SEAL: mechanical seal ceramic - graphite - NBR, with oil barrier chamber and inner lip seal to protect the seal in the event of dry running.• MOTOR: submersible asynchronous single-phase for continuous duty.SPEED MOP: single-phase 220÷240 V-50 Hz with capacitor and thermal overload protector. • INSULATION: class F. • PROTECTION: IP 68. STANDARD FEATURES: • Neoprene power cable “H05 RN-F” • length 5 metres with Schuko plug. • Hosetail.INSTALLATION AND USETHE SPEED MOP SERIES IS SUITABLE FOR DRAINING CLEAR WATER WITHOUT ABRASIVE PARTICLES.THEIR ABILITY TO DRAIN WATER DOWN TO 2 MILLIMETRES FROM THE FLOOR MAKES THEM IDEAL FOR EMERGENCY DOMESTIC USE FOR SMALL FLOODED AREAS AND IN ALL THOSEAPPLICATIONS WHERE MAXIMUM DRAINAGE IS REQUIRED.GUARANTEE 2 YEARS subject to our general terms of sale.CONSTRUCTION CHARACTERISTICS • DELIVERY BODY: glass filled technopolymer,